
Blogging is a way for Kalsi Engineering to provide up to date information more quickly than we can through traditional information channels like our seal handbook and static web pages. Here you will learn how we are working to solve industry problems through posts about new rotary seal products and posts about testing directed at specific industry problems and applications. You will also learn about the people who make it all happen, as we highlight the achievements and milestones in their lives. Visit our blog for the latest information on Kalsi-brand rotary seals and other Kalsi Engineering products and services.
Submitted by
on
Kalsi Engineering introduced the 673 series Axially Constrained Seal™ (ACS) in a blog entry in October of last year. We have continued testing this advanced rotary seal in conditions that the 462 series ACS would never be considered for. The ACS is a partitioning seal used in applications having the pressure of the seal/bearing lubricant…
Submitted by
on
The Kalsi Engineering rotary seal handbook has been updated to revision level 21. The most significant revisions involve Chapter C5, “Enhanced Lubrication Kalsi Seals™” and Chapter E2, “Using Kalsi Seals in hydraulic swivels”. Minor technical, editorial and/or cosmetic changes were also made to Chapters A2, A3, B1, and D8, and Appendices 2 and 4. Chapter C5 now…
Submitted by
on
The current issue of the University of Houston Momentum magazine announces a new endowed professorship in the mechanical engineering department that is sponsored by Mr. and Mrs. M. S. Kalsi of Kalsi Engineering, Inc. The “Dr. Manmohan Singh Kalsi and Dr. Marie-Luise Schubert Kalsi Endowed Professorship” was established in 2014 in honor of Professor Gabriel…
Submitted by
on
This is a video tour of our rotary shaft seal testing facility. Tests are planned and directed by the team of engineers who are responsible for developing and supporting our rotary shaft seal products. In a typical year, over 12,000 hours of rotary testing takes place. Much of this testing is conducted to evaluate emerging…
Submitted by
on
Introduction The high pressure washpipe assemblies used in oil well drilling are subjected to difficult sealing conditions. A conventional washpipe packing fails in only a few hours when subjected to 6,000 psi or greater mud pressure. Replacement of the failed washpipe packing assembly typically requires the bottom hole assembly to be tripped back into the…
Submitted by
on
Introduction to rotating cement heads One of the critical steps in completing an oil or gas well is pumping cement into the well annulus that is located between the casing and the bore of the well. Among other things, cementing provides zonal isolation, and provides support and protection for the casing. Rotation of the casing…
Submitted by
on
A new chapter titled “Using Kalsi Seals in side port swivels” has been added in the Application Engineering section of our rotary seal handbook. This new, well-illustrated chapter describes the best practices for designing high pressure side port swivels for use with Kalsi-brand rotary shaft seals. The suggested swivel design incorporates Kalsi Engineering’s patented floating…
Submitted by
on
Kalsi Engineering is pleased to announce a new benchmark in high pressure rotary seal performance. A pair of PN 655-4-114 Extra Wide Enhanced Lubrication Seals™ have been tested at 5,000 psi for 40 days against a 2.75” (69.85mm) shaft rotating at 252 ft/minute (1.28 m/s) with 0.010” (0.25mm) dynamic runout. This is the most severe…
Submitted by
on
After several years of development, Kalsi Engineering is pleased to announce a new line of 0.335” (8.51mm) cross-section Axially Constrained Seals: The 673 series. This new series offers improved abrasive exclusion performance over 462 series seals in conditions where the pressure of the abrasive environment is greater than the pressure of the seal lubricant. It…
Submitted by
on
Kalsi Seals-brand rotary seals have been used in rotating control devices (RCDs) for many years. Prior to this year, however, usage has been restricted to lubricant overpressure type RCDs, where the lubricant supply provides seal lubricant at a pressure that is several hundred psi greater than the pressure of the wellbore. A pair of Kalsi…