High Pressure Washpipe Packing
Kalsi-brand high pressure washpipe packing rings were developed to accommodate the higher speed and pressure conditions encountered in the modern oilfield drilling environment. Interchangeable with conventional oilfield packing, the unique geometry of our high-performance washpipe packing provides cooler operation and longer life through improved lubrication of the dynamic sealing interface. Contact Kalsi Engineering for information on spacer design, washpipe assembly, and greasing practices. Not recommended for temperatures greater than 275°F (135°C).
|Washpipe OD||Packing Part No.||Spacer Bore|
|2.750″ (69.85mm)||602-25||3.875″ (98.4mm)|
|3.500″ (88.90mm)||602-7||4.625″ (117.5mm)|
|3.625″ (92.08mm)||602-23||5.000″ (127mm)|
|4.875″ (123.83mm)||602-22||6.250″ (158.8mm)|
- Additional packing sizes can be furnished, subject to a one-time tooling charge to help to defray associated engineering, machining and set-up expenses.
- Purchase orders should be sent to the attention of Seal Sales via fax at 281-240-0255, or by e-mail.
Updated October 5, 2018
Kalsi-brand rotary shaft seals are offered for sale under the terms and conditions of the “Offer of Sale” that is included in the current revision of the Kalsi Seals Handbook.