Home
Contact Us
Search
Industries Served
Valve Technology
Analytical Services
Design & Testing
Failure Analysis
Rotary Seals
Thrust Bearings
Software
Test Hardware

Consulting Engineering Logo

 

  Test Hardware
 

Kalsi Engineering provides many types of test hardware to support plant engineering, maintenance activities, and valve/actuator manufacturers.


 

Free Acrobat® Reader™ software is required to view the PDF brochures that are listed below.


 

Kalsi Engineering Brochures in PDF format:
 

MOV Actuator Test Stand
(175KB)
The Kalsi Engineering MOV Actuator Test Stand provides an efficient way to verify and calibrate  torque output of MOV actuators, providing additional capability over calculated/published data.

Justification for the Kalsi MOV Actuator Test Stand

(145KB)
Actuator output capability can be increased by 10%-40% with the MOV Actuator Test Stand (Torque and Thrust).  Demonstrated with 10+     years of plant experience. 

Torque-Only MOV Actuator Test Stand
(217 KB)
The torque-only MOV Actuator  Test Stand provides quick-change adaptation for large actuator production runs.

 

 

 

 


Disclaimer

USE THE LITERATURE ENTIRELY AT YOUR OWN RISK. THE LITERATURE IS PROVIDED "AS IS", "WITH ALL FAULTS". KALSI ENGINEERING MAKES NO WARRANTY, EXPRESS, OR IMPLIED REGARDING THE LITERATURE, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, PERFORMANCE, AND FITNESS FOR A PARTICULAR USE OR PURPOSE. KALSI ENGINEERING (INCLUDING ITS AGENTS AND EMPLOYEES) ASSUMES NO LIABILITY WHATSOEVER FOR ANY LOSS OR DAMAGE OF ANY KIND OR NATURE THAT MAY RESULT FROM THE USE OF, REFERENCE TO OR RELIANCE ON THE LITERATURE, INCLUDING BUT NOT LIMITED TO CONSEQUENTIAL, SPECIAL (INCLUDING LOSS OF PROFIT), DIRECT, INDIRECT, INCIDENTAL OR SIMILAR DAMAGES, EVEN IF KALSI ENGINEERING HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.


“Adobe” and “Acrobat Reader” are trademarks of Adobe Systems Incorporated.

   

 

© 1998 - 2008 Kalsi Engineering, Inc.
745 Park Two Drive
Sugar Land, Texas  77478-2885
Tel: (281) 240-6500  Fax: (281) 240-0255

Texas Board of Professional Engineers
Firm Registration Number F-7380

State of Kansas Board of Technical Professions
Engineering Certificate No. E-1246