KEI Can Provide Assistance For:

• JOG MOV PV Program Implementation
• Flashing/nonflashing determination for globe valves
• Valve classification
• Margin improvement options for Class B and C valves
• PV Qualification Basis approaches for Class D valves
• Valve analysis using JOG MOV PV, EPRI PPM or KEI methods
• Analysis of in-plant test data
• Flow loop or laboratory testing support

KEI Can Perform Calculations Using EPRI PPM Software Analysis

• KEI staff is trained and experienced on the use and limitations of the EPRI PPM software
• KEI was one of the principal contributors to the EPRI PPM methodology

 KEI Can Perform Calculations Using KVAP Software

• Analyze quarter-turn valves with position specific accuracy to improve JOG MOV PV margin
• Analyze other common valve types to establish requirements and to develop input for the JOG MOV PV

 LiFE Software Analysis Allows the User to:

• Analyze thrust and/or torque capability above manufacturer’s ratings to obtain more operating margin.
• Obtain a more accurate cost-justification analysis for actuator replacement versus limited operating cycles with existing actuator.

 KEI Actuator Test Stand Allows the User to:

• Accurately quantify actuator normal and reduced voltage torque capability to obtain more operating margin.
• Perform pre-test new or rebuilt actuators prior to field installation to ensure predicted margin exists and to eliminate costly rework.

Kalsi Engineering, Inc.   745 Park Two Drive   Sugar Land, Texas  77478-2885  Tel: (281) 240-6500    Fax: (281) 240-0255

Top