Home
Contact Us
Search
Industries Served		 Valve Technology
Analytical Services
Design & Testing
Failure Analysis		 Rotary Seals
Thrust Bearings
Software
Test Hardware

Consulting Engineering Logo

 
   Standard Kalsi Seal Sizes


Standard Kalsi Seal Sizes

Nominal Inside Diameter for –10 and –11 materials*

Basic Seal Part
Number*

Seal Radial Depth D (inches)


 
Standard Seal Depth

Seal Axial Width
(inches)



Standard seal width

Gland
Depth R
(inches)
(See Fig. 3-2)**
a

Gland Width (inches)
+0.005"
-0.000"
(See Fig. 3-2)**
 a

0.394" 10.00 mm 344-134-* 0.186 ±0.003 0.170

0.166

 0.206
0.394" 10.00 mm 344-303-* 0.225 ±0.003 0.170

0.205

 0.202
0.500" 12.70 mm 344-141-* 0.186 ±0.003 0.170 0.166 0.206
0.568" 14.42 mm 344-11-* 0.139 ±0.003 †

0.120 †

 0.120 0.150
0.568" 14.42 mm 344-329-* 0.225 ±0.003 † 0.220 0.205 0.280
0.672" 17.07 mm 344-21-* 0.186 ±0.003 0.170 0.166 0.206
0.709" 18.00 mm 344-166-* 0.145 ±0.003

0.170

0.125 0.209
0.709" 18.00 mm 344-125-* 0.186 ±0.003

0.170

0.166 0.206
0.787" 20.00 mm 344-128-* 0.145 ±0.003

0.170

0.125 0.209
0.827" 21.00 mm 344-156-*

0.145 ±0.003

0.170

0.125 0.209
0.827" 21.00 mm 344-315-*

0.450 ±0.005 †

0.250

0.424 0.309
0.875" 22.23 mm 344-140-* 0.170 ±0.003 †

0.170 †

 0.150 0.215
1.005" 25.53 mm 344-19-* 0.145 ±0.003

0.170

0.125 0.209
1.102" 28.00 mm 344-122-* 0.212 ±0.003

0.220

0.189 0.262
1.188" 30.18 mm 344-91-* 0.212 ±0.005

0.220

 0.189 0.262
1.188" 30.18 mm 344-120-* 0.270 ±0.005

0.220

 0.244 0.262
1.250" 31.75 mm 344-191-* 0.212 ±0.003

0.220

0.189 0.262
1.259" 32.00 mm 344-220-* 0.335 ±0.005

0.250

 0.309 0.302
1.271" 32.28 mm 344-222-* 0.335 ±0.005

0.250

 0.309 0.302
1.375" 34.92 mm 344-63-* 0.212 ±0.005

0.220

0.189 0.262
1.375" 34.92 mm 344-249-* 0.280 ±0.005

0.220†

 0.244 0.262
1.445" 36.70 mm 344-95-* 0.212 ±0.005

0.220

 0.189 0.262
1.494" 37.95 mm 344-69-* 0.212 ±0.005

0.220

0.189 0.262
1.625" 41.28 mm 344-143-* 0.186 ±0.003

0.170

0.166 0.206
1.625" 41.28 mm 344-150-* 0.212 ±0.005

0.220

0.189 0.262
1.750" 44.45 mm 344-175-* 0.270 ±0.005

0.250

 0.244 0.292
1.750" 44.45 mm 344-131-* 0.335 ±0.005

0.250

 0.309 0.289
1.781" 45.24 mm 344-109-* 0.270 ±0.005

0.250

 0.244 0.292
1.859" 47.22 mm 344-36-* 0.270 ±0.005

0.220

 0.244 0.262
1.891" 48.03 mm 344-15-* 0.270 ±0.005

0.220

 0.244 0.262
1.891" 48.03 mm 344-85-* 0.212 ±0.005

0.220

0.189 0.262
1.979" 50.27 mm 344-41-* 0.335 ±0.005

0.250

 0.309 0.289
1.979" 50.27 mm 344-45-* 0.270 ±0.005

0.250

0.244 0.292
2.005" 50.93 mm 344-89-* 0.270 ±0.005

0.250

0.244 0.292
2.005" 50.93 mm 344-87-* 0.335 ±0.005

0.250

0.309 0.289
2.047" 52.00 mm 344-196-* 0.335 ±0.005

0.250

 0.309 0.289
2.165" 55.00 mm 344-193-* 0.335 ±0.005

0.250

 0.309 0.289
2.165" 55.00 mm 344-194-* 0.270 ±0.005

0.250

0.244 0.292
2.250" 57.15 mm 344-61-* 0.270 ±0.005

0.250

 0.244 0.292
2.250" 57.15 mm 344-65-* 0.335 ±0.005

0.250

 0.309 0.289
2.362" 60.00 mm 344-327-* 0.335±0.005

0.250

0.309

0.289
2.502" 63.55 mm 344-114-* 0.270 ±0.005

0.250

 0.244 0.292
2.502" 63.55 mm 344-39-* 0.335 ±0.005

0.250

0.309 0.289
2.559" 65.00 mm 344-171-* 0.270 ±0.005

0.250

 0.244 0.292
2.559" 65.00 mm 344-170-* 0.335 ±0.005

0.250

 0.309 0.289
2.598" 66.00 mm 344-152-* 0.335 ±0.005

0.250

 0.309 0.289
2.756" 70.00 mm 344-25-* 0.335 ±0.005

0.250

 0.309 0.289
2.875" 73.02 mm 344-197-* 0.335 ±0.005

0.250

 0.309 0.289
2.953" 75.00 mm 344-184-* 0.335 ±0.005

0.250

 0.309 0.289
3.000" 76.20 mm 344-116-* 0.335 ±0.005

0.250

0.309 0.289
3.145" 79.88 mm 344-53-* 0.335 ±0.005

0.250

 0.309 0.289
3.145" 79.88 mm 344-59-* 0.270 ±0.005

0.250

0.244 0.292
3.250" 82.55 mm 344-179-* 0.270 ±0.005

0.250

 0.244 0.292
3.250" 82.55 mm 344-71-* 0.335 ±0.005

0.250

0.309 0.289
3.365" 85.47 mm 344-81-* 0.300 ±0.005

0.250

0.274 0.292
3.479" 88.37 mm 344-67-* 0.300 ±0.005

0.250

0.274 0.292
3.543" 90.00 mm 344-207-* 0.335 ±0.005

0.250

0.309 0.289
3.757" 95.43 mm 344-73-* 0.335 ±0.005

0.250

0.309 0.289
3.937" 100.00 mm 344-164-* 0.335 ±0.005

0.250

 0.309 0.289
3.937" 100.00 mm 344-201-* 0.270 ±0.005

0.250

 0.244 0.292
4.000" 101.60 mm 344-132-* 0.335 ±0.005

0.250

 0.309 0.289
4.271" 108.48 mm 344-104-* 0.335 ±0.005

0.250

 0.309 0.289
4.376" 111.15 mm 344-83-* 0.335 ±0.005

0.250

 0.309 0.289
4.500" 114.30 mm 344-75-* 0.335 ±0.005

0.250

 0.309 0.289
4.625" 117.48 mm 344-182-* 0.335 ±0.005

0.250

 0.309 0.289
4.724" 120.00 mm 344-203-* 0.335 ±0.005

0.250

 0.309 0.289
4.750" 120.65 mm 344-48-* 0.335 ±0.005

0.250

0.309 0.289
5.000" 127.00 mm 344-77-* 0.335 ±0.005

0.250

 0.309 0.289
5.118" 130.00 mm 344-167-* 0.335 ±0.005

0.250

 0.309 0.289
5.250" 133.35 mm 344-118-* 0.335 ±0.005

0.250

0.309 0.289
5.473" 139.01 mm 344-57-* 0.270 ±0.005

0.220

0.244 0.262
5.500" 139.70 mm 344-218-* 0.270 ±0.005

0.250

 0.244 0.292
5.500" 139.70 mm 344-217-* 0.335 ±0.005

0.250

0.309 0.289
5.625" 142.88 mm 344-79-* 0.335 ±0.005

0.250

0.309 0.289
5.750" 146.05 mm 344-296-* 0.335±0.005 0.250 0.309 0.289
5.905" 150.00 mm 344-160-* 0.335 ±0.005

0.250

0.309 0.289
6.000" 152.40 mm 344-178-* 0.270 ±0.005

0.250

 0.244 0.292
6.000" 152.40 mm 344-97-* 0.335 ±0.005

0.250

 0.309 0.289
6.519" 165.58 mm 344-55-* 0.335 ±0.005

0.250

 0.309 0.289
6.695" 170.00 mm 344-254-* 0.329 ±0.005 †

0.210 †

 0.303 0.250
6.756" 171.60 mm 344-23-* 0.335 ±0.005

0.250

0.309 0.289
7.286" 185.06 mm 344-99-* 0.335 ±0.005

0.250

 0.309 0.289
7.750" 196.85 mm 381-29-* 0.415 ±0.005

0.300

0.380 0.342
8.000" 203.20 mm 344-158-* 0.335 ±0.005

0.250

0.309 0.289
8.260" 209.80 mm 344-186-* 0.327 ±0.005 †

0.210 †

 0.300 0.250
8.575" 217.80 mm 344-93-* 0.335 ±0.005

0.250

0.309 0.289
8.983" 228.17 mm 381-26-* 0.415 ±0.006

0.300

0.380 0.342
9.012" 228.90 mm 344-209-* 0.329 ±0.005 †

0.210 †

 0.303 0.250
9.765" 248.03 mm 381-16-* 0.415 ±0.005

0.300

0.380 0.342
10.500" 266.70 mm 381-6-* 0.415 ±0.008

0.300

0.380 0.342
13.000" 330.20 mm 381-11-* 0.415 ±0.005

0.300

0.380 0.342
13.438" 341.33 mm 381-33-* 0.415 ±0.005

0.300

0.380 0.342
13.928" 353.77 mm 381-31-* 0.415 ±0.005

0.300

0.380 0.342
14.500" 368.3 mm 483-1-* 0.445 ±0.007 0.300 0.415 0.342
16.593" 421.61 mm 381-1-* 0.415 ±0.008

0.300

0.380 0.342
18.525"† 470.54 mm 483-3-* 0.445 ±0.007 0.300 0.415 0.342


Additional sizes can be furnished, subject to a one-time tooling charge to help to defray associated engineering, machining and set-up expenses.

To download the current rotary seal implementation guidelines (Kalsi Seals Handbook, Rev. 1) in PDF format, right click here and use the “Save Target As” command.

To download a dxf file of Standard Kalsi Seal cross-sections for inclusion in assembly drawings, right click here and use the “Save Target As” command.

Seal purchase orders should be sent to the attention of the Product & Sales Coordinator via fax number            (281-240-0255) or  or e-mail at sealdesk@kalsi.com.
 
*

The complete seal part number consists of the basic part number plus the material dash number.
** 

 

 Figure 3-2 of the Kalsi Seals Handbook, Rev. 1 has the recommended gland details.  Gland width recommendations are based on low differential-pressure testing, and finite element analysis of nominal dimension seals at 350ºF (176.7ºC) having a conservatively estimated coefficient of thermal expansion of 13E-5 in/in/ºF. MMC seal tolerance conditions were not considered because it was considered unlikely that a seal would be at the upper bound of both the thermal expansion range and the dimensional tolerance range. For detailed seal width predictions as a function of tolerance conditions and seal diameter, see Appendix C. The recommended gland widths that are included in the table above were developed to minimize seal to gland clearance to inhibit skew-induced wear of seals in low differential pressure applications, and do not take media-related swelling into account. Increased gland width may be desirable if significant swelling is anticipated; see Section 3.4. Since the gland widths in the table above may result in axial confinement of the seal at high temperature; it may be beneficial to increase the gland width to accommodate the thermally-expanded width of the seal in high differential pressure applications, in order to achieve reduced interfacial contact pressure. Such gland widths can be based on the seal width predictions in Appendix C.
†   Non-standard cross-sectional size.
   
   

Updated: April 15, 2010

Kalsi Seals are offered for sale under the terms and conditions of the "Offer of Sale" that is included in the current revision of the Kalsi Seals Handbook.
 

Kalsi Engineering, Inc.   745 Park Two Drive   Sugar Land, Texas  77478-2885  Tel: (281) 240-6500    Fax: (281) 240-0255