Home
Contact Us
Search
Industries Served		 Valve Technology
Analytical Services
Design & Testing
Failure Analysis		 Rotary Seals
Thrust Bearings
Software
Test Hardware

Consulting Engineering Logo

 
  Software
 

Our suite of engineering software began with JarPro™ jarring analysis software, which is used to reduce the costs associated with a stuck drillstring by optimizing jarring tool placement. KVAP™, CVAP™ and LiFE™ are state-of-the art software applications that are widely used to evaluate critical valve and actuator issues in nuclear power plants. Our latest software, COMMAND™, comprehensively meets the documentation and trending requirements of the ASME OM Code Mandatory Appendix II, Check Valve Condition Monitoring Program. 
 


Free Acrobat® Reader™ software is required to view the PDF brochures that are listed below.


 

Kalsi Engineering Training Classes in PDF format:
 
 

Training Classes

Kalsi Engineering’s comprehensive training   seminar classes cover the basic design, operational, repair and maintenance aspects of major valve types and current valve issues in the nuclear power industry.

 


Valve, Actuator, and Software Training Flyer
 (115KB)
Kalsi Engineering Software Literature in PDF format:
 
KVAP Valve & Actuator Program

The Kalsi Valve & Actuator Program (KVAP), is state-of-the-art software that performs design basis calculations for all common linear and quarter-turn AOVs and MOVs in the industry. The KVAP validated quarter-turn models with position-dependant accuracy, which no other software contains, providing substantial margin increases in many applications.

 

 

KVAP Brochure
 (813KB)

 

 

KVAP Software Flyer
(189KB)

 
CVAP Check Valve Analysis & Prioritization Software

The Check Valve Analysis & Prioritization software (CVAP) quantifies the rate of degradation of check valve internals, including hinge pin wear and disk stud fatigue.  The software is used to prioritize valve maintenance, diagnose problems, improve reliability, and trend inspection results for condition monitoring.

 

 

CVAP Brochure
(1.33MB)

 

CVAP Software Flyer
(164KB)

LiFE and JarPro Software

LiFE
LiFE software computes the design life of the thrust and torsional components of Limitorque actuators of type SMB/ SB/SBD, ranging from size 000 to size 2.

JarPro
JarPro software is a general-purpose 2D jarring analysis program used to reduce the cost of  stuck pipe events.

 

LiFE Software Flyer
(143KB)

 

JarPro Software Flyer
(327 KB)
  
COMMAND Software

COMMAND
The COMMAND software is designed  to comprehensively meet the documentation and trending  requirements of the ASME OM Code Mandatory Appendix II “Check Valve Condition Monitoring Program.”

 


COMMAND Software Flyer
(167KB)

 

 

Disclaimer

USE THE LITERATURE ENTIRELY AT YOUR OWN RISK. THE LITERATURE IS PROVIDED "AS IS", "WITH ALL FAULTS". KALSI ENGINEERING MAKES NO WARRANTY, EXPRESS, OR IMPLIED REGARDING THE LITERATURE, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, PERFORMANCE, AND FITNESS FOR A PARTICULAR USE OR PURPOSE. KALSI ENGINEERING (INCLUDING ITS AGENTS AND EMPLOYEES) ASSUMES NO LIABILITY WHATSOEVER FOR ANY LOSS OR DAMAGE OF ANY KIND OR NATURE THAT MAY RESULT FROM THE USE OF, REFERENCE TO OR RELIANCE ON THE LITERATURE, INCLUDING BUT NOT LIMITED TO CONSEQUENTIAL, SPECIAL (INCLUDING LOSS OF PROFIT), DIRECT, INDIRECT, INCIDENTAL OR SIMILAR DAMAGES, EVEN IF KALSI ENGINEERING HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

 “Adobe” and “Acrobat Reader” are trademarks of Adobe Systems Incorporated.

   

 

© 1998 - 2008 Kalsi Engineering, Inc.
745 Park Two Drive
Sugar Land, Texas  77478-2885
Tel: (281) 240-6500  Fax: (281) 240-0255

Texas Board of Professional Engineers
Firm Registration Number F-7380

State of Kansas Board of Technical Professions
Engineering Certificate No. E-1246